Anchor rode
- Clyde_Wanderer
- Yellow Admiral
- Posts: 1107
- Joined: Mon May 19, 2008 8:00 pm
- Boat Type: Hummingbird 30
- Location: Clyde
Re: Anchor rode
Its a biggg strong hairy chested nymphomaniac who also loves boats.DaveS wrote:Most interesting.
WTFs a "hull hugger", though?




http://www.duncanyacht.co.uk/showpartnu ... rID=109944" onclick="window.open(this.href);return false;
- DaveS
- Yellow Admiral
- Posts: 1341
- Joined: Sat Dec 17, 2005 1:10 am
- Boat Type: Seastream 34
- Location: Me: Falkirk, Boat: Craobh
Re: Anchor rode
Thanks for the most generous offer. In fact, I already have a sizeable piece of sprayhood window material, but I was reluctant to cut a wee corner out of a biggish sheet. Hence I was delighted to agree to trade a finely engineered (IMHO), but now surplus to requirements and positively in the road, mast raising shearlegs gadget for a wee bit of clear plastic which would have avoided cutting my big bit. But plans gang aft aglay...FullCircle wrote:I have some sprayhood window plastic spare. Let me know your address by PM and how much you need, and I will send you a bit.DaveS wrote:Aye!!!
A want tae mak a wee raincoat fur ma autohelm, but a want a bit tae see through.
(Nobody claimed any of this was entirely logical...)
- Clyde_Wanderer
- Yellow Admiral
- Posts: 1107
- Joined: Mon May 19, 2008 8:00 pm
- Boat Type: Hummingbird 30
- Location: Clyde
Re: Anchor rode
No, but I can get you some if you need it, in grey colour only though.Silkie wrote:Can you get sm pvc from the Anne Summers shop?
Its this new fangled material that is used on lots of flat roofing nowadays, and can be welded together easilt with the correct hot air gun made for the purpose, can even be welded while wet.
C_W
- Silkie
- Admiral of the Fleet
- Posts: 3475
- Joined: Sat Mar 05, 2005 12:55 pm
- Boat Type: Hurley 22
- Location: Bonnie Scotland
- Contact:
Re: Anchor rode
Sounds like just the thing for my garage roof. What are it's advantages over torch-on felt?
different colours made of tears
- little boy blue
- Old Salt
- Posts: 662
- Joined: Wed Jul 06, 2005 7:53 pm
- Location: CLYDE
Re: Anchor rode
cw has been antifouling till dark this evening. he will no doubt be along later.
- Clyde_Wanderer
- Yellow Admiral
- Posts: 1107
- Joined: Mon May 19, 2008 8:00 pm
- Boat Type: Hummingbird 30
- Location: Clyde
Re: Anchor rode
Silkie, its got something like 20-25 year life expectancy, and is laid over some sort of thin insulating membrane which prevents comdonsation, its also a lot easier to work with, no tar no gas torch no felt etc, can be just laid out over sarking and fitted inside the facia's and gets welded at any joints.Silkie wrote:Sounds like just the thing for my garage roof. What are it's advantages over torch-on felt?
Hope this helps.
C_W
- Clyde_Wanderer
- Yellow Admiral
- Posts: 1107
- Joined: Mon May 19, 2008 8:00 pm
- Boat Type: Hummingbird 30
- Location: Clyde
Re: Anchor rode
Well managed to get 2 coats on the boot top and the masking tape removed.little boy blue wrote:cw has been antifouling till dark this evening. he will no doubt be along later.
Do you want to buy some oxalic acid?
- little boy blue
- Old Salt
- Posts: 662
- Joined: Wed Jul 06, 2005 7:53 pm
- Location: CLYDE
Re: Anchor rode
yes, why not.Clyde_Wanderer wrote: .... Do you want to buy some oxalic acid?
- Rowana
- Old Salt
- Posts: 773
- Joined: Fri Feb 08, 2008 4:58 pm
- Boat Type: Macwester Rowan 8 meter
- Location: Aberdeenshire
Re: Anchor rode
I'll have a wee drop too, if you have any spare.little boy blue wrote:yes, why not.Clyde_Wanderer wrote: .... Do you want to buy some oxalic acid?
BLESSED ARE THOSE WHO ARE CRACKED,
FOR THEY ARE THE ONES WHO LET IN THE LIGHT
FOR THEY ARE THE ONES WHO LET IN THE LIGHT
- Clyde_Wanderer
- Yellow Admiral
- Posts: 1107
- Joined: Mon May 19, 2008 8:00 pm
- Boat Type: Hummingbird 30
- Location: Clyde
Re: Anchor rode
I have it advertised elsewhere at £12.50 per kilo delivered, but since I can hand it over to you it will just set you back a tenner.little boy blue wrote:yes, why not.Clyde_Wanderer wrote: .... Do you want to buy some oxalic acid?
Will stick some in my van for you.
C_W
- Clyde_Wanderer
- Yellow Admiral
- Posts: 1107
- Joined: Mon May 19, 2008 8:00 pm
- Boat Type: Hummingbird 30
- Location: Clyde
Re: Anchor rode
Rowana, I made the mistake of advertising it on another place instead of here first and then linking it to the aforementioned place, hence the reason it aint advertised on this site.Rowana wrote:I'll have a wee drop too, if you have any spare.little boy blue wrote:yes, why not.Clyde_Wanderer wrote: .... Do you want to buy some oxalic acid?
It is £12.50 a kilo delivered to UK mainland.
If you pm me your details I will get it away to you on mon next.
Thanks, C_W.
- Clyde_Wanderer
- Yellow Admiral
- Posts: 1107
- Joined: Mon May 19, 2008 8:00 pm
- Boat Type: Hummingbird 30
- Location: Clyde
Re: Anchor rode
I guess no one saw my post reply on this thread asking for some advice on anchor chain/rode lengths etc.
I was hoping some of you guys from the west coast could give advice gleened from years of practical experience in the matter.
I'll keep my fingers crossed
C_W
I was hoping some of you guys from the west coast could give advice gleened from years of practical experience in the matter.
I'll keep my fingers crossed

C_W
- sahona
- Admiral of the White
- Posts: 1992
- Joined: Thu Jan 03, 2008 8:17 pm
- Boat Type: Marcon Claymore
- Location: Clyde
Re: Anchor rode
At the risk of liberating a jar of worms.......................
The anchors you quote seem quite light to me, but anyway, they work by never having a direct "chug", so should have enough chain to provide the correct catenary (sp?)
The weight of the boat in this context always raises a question in my mind, as it weighs nothing when afloat - however, if the mass of boat is set moving by a combination of wind and wave, the anchor,chain and rode will be what stops it, hopefully.
If you dig in the anchor, the chain near it should never leave the ground. That means - long enough, heavy enough, and, if on the borderline, connected to the boat by a stretchy bit of rope to absorb shock.
It's all been said and written before, and to be honest, you just have to get out and do it - like most aspects of sailing-
advice is given from the writers personal experience, which may not be pertinant to the readers circumstances.
My tip is to make sure of the bottom-type before dropping the hook. Look for sand/clay avoid weed/rock. sometimes the chart helps, others you can see, others you do multiple tests...
The anchors you quote seem quite light to me, but anyway, they work by never having a direct "chug", so should have enough chain to provide the correct catenary (sp?)
The weight of the boat in this context always raises a question in my mind, as it weighs nothing when afloat - however, if the mass of boat is set moving by a combination of wind and wave, the anchor,chain and rode will be what stops it, hopefully.
If you dig in the anchor, the chain near it should never leave the ground. That means - long enough, heavy enough, and, if on the borderline, connected to the boat by a stretchy bit of rope to absorb shock.
It's all been said and written before, and to be honest, you just have to get out and do it - like most aspects of sailing-
advice is given from the writers personal experience, which may not be pertinant to the readers circumstances.
My tip is to make sure of the bottom-type before dropping the hook. Look for sand/clay avoid weed/rock. sometimes the chart helps, others you can see, others you do multiple tests...
http://trooncruisingclub.org/ 20' - 30' Berths available, Clyde.
Cruising, racing, maintenance facilities. Go take a look, you know you want to.
Cruising, racing, maintenance facilities. Go take a look, you know you want to.
- Ancora Latina
- Able Seaman
- Posts: 17
- Joined: Sun Oct 05, 2008 6:17 pm
- Location: Brasil
- Contact:
Re: Anchor rode
The shock-absorbing effects of chain catenary provide the least benefit (to the point of being non-existent) at precisely when you need it the most. In other words, catenary's effectiveness as a substitute for line elasticity is inversely proportionate to the degree that it is needed.sahona wrote:should have enough chain to provide the correct catenary ...
Chain catenary is there basically when you need it the least.