take a look at the instagram account of S/Y Lofna / swan_36_lofna which was restored in Northern Ireland over the last couple of years. They re-did their cove line and that might give you some ideas.
https://www.instagram.com/p/CahlLkxgLHP ... _copy_link
Cove Line Infill Replacement
-
Gardenshed
- Old Salt
- Posts: 720
- Joined: Sun Apr 26, 2009 3:59 pm
- Boat Type: Grand Soleil 39 & Hobie Tiger
- Location: 13:44:00N 100:32:00E
-
Gardenshed
- Old Salt
- Posts: 720
- Joined: Sun Apr 26, 2009 3:59 pm
- Boat Type: Grand Soleil 39 & Hobie Tiger
- Location: 13:44:00N 100:32:00E
Re: Cove Line Infill Replacement
one tip is to use vinyl lining tape (2mm wide or 3mm wide) for masking off, especially where there are tight curves, then to use normal masking tape for larger radius
- claymore
- Admiral of the Green
- Posts: 4763
- Joined: Sun Oct 19, 2003 2:55 pm
- Boat Type: Claymore
- Location: Ardfern or Lancashire
Re: Cove Line Infill Replacement
I mask it off and use humbrol enamel paint (The stuff I used to paint on my Spitfires and lancasters!)
Regards
Claymore

Claymore

